The PRO-FOR PROFOR20250 Hand Held Auger is a manual drain-cleaning tool designed for clearing small and medium clogged drains.
It uses a 25 ft long, 3/8 in diameter spring wire, with an integrated corkscrew open-wound boring head and a galvanized steel crank handle.
Product Overview
Model: PROFOR20250
Product: Hand Held Auger
Cable Length: 25 ft
Cable Diameter: 3/8 in
The auger is designed for manual operation and uses a crank handle to rotate the cable through the drain.
Before Use
Read and understand all instructions before operating the drain auger.
For personal protection:
- Wear ANSI-approved safety goggles with side shields.
- Wear rubber gloves.
- Keep hands protected while handling the drain cable.
Improper use may result in personal injury, property damage, or product failure.
How to Use the Hand Held Auger
Step 1 — Insert the Cable
Loosen the thumb screw on the grip handle.
Insert the wire through the handle, then guide the boring head into the drain until the clog is reached.
Step 2 — Clear the Clog
Reposition the handle and tighten the thumb screw.
Turn the crank handle clockwise to rotate the cable until the clog has cleared.
Remove the cable slowly, then flush the drain.
Cleaning and Storage
After use:
- Wash the tool and cable.
- Allow them to air dry.
- Apply oil before storing.
Regular cleaning, drying, and oiling help prepare the tool for future use.
Important Safety Information
Do not use the product until all operating instructions have been read and understood.
Always use appropriate eye and hand protection during operation.
The product packaging also contains a California Proposition 65 warning regarding exposure to chemicals including DEHP. Refer to the product packaging for the complete warning.
Need Product Support?
For questions or support, contact:
